Pinecrest

Door Specifications

Printable Version

PINECREST® doors are custom manufactured and supplied unfinished.
Many of our designs are copyrighted.

A. STANDARD WOOD SPECIES

Alder*, Knotty Alder, Distressed Knotty Alder, Plain Sawn Red Oak, Quarter Sawn Red Oak, Philippine Mahogany, Soft Maple and Paint Grade Yellow Poplar (recommended for interior use only) are standard. Other woods are available.

All PINECREST® doors are manufactured from U.S. kiln dried hardwoods with natural variations in color, grain and texture. Hand select lumber is available for an extra charge. For nonstained (clear) finishes we recommend hand select lumber.

Doors with book matched grain are not available.

* Regular Alder may contain some imperfections such as a few small knots.

B. SIZES

Standard door sizes are 30”, 32”, 36” widths x 80” and 84” heights; 36” x 96”H; 42”W x 84”H; 42”W x 96”H. Custom sizes are also available. Doors larger than 42”W and/or 96”H are not warranted (regardless of thickness) against bow or twist. Doors under 42”W and 96”H can be 1-3/4”, 2”, or 2-1/4”T. 2-1/4” thickness is recommended for doors over 42”W and/or 96”H. If the door size you wish to order is significantly different from the sizes (usually 36”W x 80”/84”/96” H) shown in the images, adjustments and/or alterations in some design configurations and panel proportions may be necessary to accommodate your dimensions. We will use our own interpretation for number of lites, number of raised panels and the expanded or contracted camed glass designs unless specified otherwise.

C. THICKNESSES

Standard thickness is 1- 3/4”. 1- 3/8” thick doors are available through 36” widths and 84” heights. Doors less than 1- 3/4” thickness will not accommodate camed glass with safety glass reinforcement. 2” and 2- 1/4” thick doors are also available. The standard thickness for hand-wrought iron (Manorgate®) doors is 2-1/4" for double glazed insulating and 1-3/4" for single glazed.

D. CONSTRUCTION

PINECREST® doors are pegged mortise and tenon construction.

To avoid the possibility of warped stiles and rails, most doors have stave core stiles and rails with heavy veneer (pdf) (at the discretion of PINECREST®).

E. HAND CARVED AND SOLID PANEL DOORS

  1. Many doors are available carved one side or carved two sides. Many uncarved solid raised panel doors are available with mouldings one side or two sides. When doors are carved one side, or have mouldings one side, the reverse side will be raised panels. Doors with raised panels and no mouldings have raised panels both sides.
  2. In many door designs, glass may be substituted for any carved or raised panel.

F. ASYMMETRICAL DESIGNS

  1. Double doors will be mirror image matched unless specified otherwise.
  2. Single prehung doors: To avoid the possibility of inadvertent design reversal, it must be specified how the asymmetrical design is to appear on the exterior.

G. CUSTOM DESIGNS

Custom designs are available. Forward detailed sketches.

H. NONINSULATING GLASS

  1. Single glazed noncamed glass.
  2. Camed glass with safety glass reinforcement.

Click here for more information.

I. INSULATING GLASS

  1. Double glazed noncamed glass.
  2. Triple glazed camed glass.

Click here for more information.

J. TEXTURED GLASS

Click here for more information.

K. CAMING

Leaded glass doors are also available with reinforced lead came, zinc came and brass came.

L. STILES

Because many of our doors have substantial mouldings, the mouldings may overlap the stile. The minimum exposed stile on any door with mouldings is 4- 7/8”. If the exposed stile width is important for hardware placement, contact us for exact specifications.

M. HARDWARE AND HINGES

PINECREST® furnishes hinges (no other hardware) for prehung doors. PINECREST® supplies three ball bearing hinges for all doors (regardless of thickness) thru 90”H and four hinges over 90”H thru 120”H. Doors over 42”W require four hinges.

Solid Brass Hinges – bright polished finish
Bronze Hinges – satin bronze oxidized oil rubbed finish
Solid Brass Hinges – satin chrome plating

DOOR THICKNESS HINGE SIZE
1- 3/8” 3- 1/2” x 3- 1/2”
1- 3/4” 4- 1/2” x 4- 1/2”
2” 5” x 5”
2- 1/4” 5” x 5”

N. PREHUNG DOORS – Jambs, Casing, Brick Mould, Astragals, Mull Caps, Hinging (swing direction)

Prehung Includes:

  1. Preassembling of jamb and threshold.
  2. Mortised and attached hinges.
  3. 3º bevel on lock side (single door). For double doors, the active door is beveled. If an astragal is used, the astragal is beveled to fit the beveled door. If both doors are active and there is no astragal, both doors are beveled.
  4. Door is fit and installed into the jamb.
  5. All doors have hinge pins pulled and the door is crated and shipped separately from the jamb to prevent damage in transit.

Click here for more information.

O. THRESHOLDS

Schlegel® Hydrosill™ thresholds.

Click here for more information.

P. ARCH FORMS

All doors, sidelights and transoms are available in arch forms. Arches which have unusual or untrue radii require plywood or Mylar® templates.

Click here for more information.

Q. TRANSOMS

Available to custom specifications. Forward detailed sketch. Most transoms require mullions when width exceeds 80”. Manorgate® (hand-wrought iron) transoms require mullions over 100-1/2” wide.

R. LATERALS AND SIDELIGHTS

Matching laterals and sidelights are available. For custom designs, forward sketch. PINECREST® will use its own interpretation for lateral and sidelight designs without sketches submitted.

S. MANORGATE® (Hand-Wrought Iron)

Click here for more information.

T. POWDER COAT FINISHES FOR HAND-WROUGHT IRON

Click here for more information.

U. SPEAKEASYS

SE1 Operable solid wood door (slidebolt and hinges)
SE2 Operable solid wood door with 1/4”T nonbeveled laminated glass direct set window (slidebolt and hinges)
SE3 Operable 1/4”T nonbeveled laminated glass sash door (slidebolt and hinges)
SE4 Fixed glass sash window with 1/4”T nonbeveled laminated glass (noninsulating).
SE4 Fixed glass sash window with 5/8”T nonbeveled glass (insulating).

Speakeasys are available rectangular and radiused. Center of speakeasy is approximately 5’ from bottom of door.

V. PROFILE OPTIONS

  1. Profile options for Post Modern Door #422A and #422B.
  2. Profile options for Classic Wood Panel Doors #601 and #607.
  3. Profile options for #800SW Series Flat and Raised Wood Panel Doors.

Click here to view the profile options listed above.

PINECREST® reserves the right to change details and specifications without notice.